So what are we talking about?…

Valid question! For a variety of reasons the committee did not finalize our agenda until just recently and we do apologize for that. We’ve discussed quite a bit in our blog posts sense January about the ideas of Innovation and why we think it really is an important discussion topic, but it is also quite nuanced and, in order for us to have useful discussions about “Innovation” then we really need to make sure we’re focused!

So, what will our focus be? Glad you asked, here are our program highlights; once again totaling nearly ten hours of discussion in a day in half!

  • Welcome to Innovation! What is it (really)? – An opportunity to discuss what innovation is to each of us and, hopefully, come to consensus on how we define it for Design Technology.
  • What are they doing…? – A look at innovations in other industries and how we could apply or learn from them.
  • Ghosts of Innovations Past & the Future – What innovations have we seen in the past and how can we use that recognition to anticipate the future?
  • Technology & Innovation: In a relationship or just friends? – Design Technology and the platforms we have available to us have both advanced significantly and perhaps not at all. In any case we can “do” a lot more than we could a decade ago so why aren’t we happy? What do we need to innovate or where is Innovation required?
  • What should we be doing to help shape the future of our practice? – We’ve spent nearly a day discussing innovation in our industry, its past, its present and possible future; what does all of that potentially mean to people like “us” i.e. Design Technologist’s. What is/will our role be in the future as technology changes/ improves.

If you’re picking up on a Dicken’s theme, you’re not mistaken, in our discussions over the last six months and looking at research done by others I think it’s clear that in order to look to the future we do need to understand the past, in addition we must understand our place relative to innovation, technology and what we mean by those terms in the first place.

We still have a few seats left (call it ten) and we’d love to fill them. If you think innovation is important to the progress of Architecture & Engineering then you should join us! Attendees of BILT will receive a Multi-event discount.

Are you a technology company working in the AEC sphere? Trying to attract attention? Want to show your support of Design Technologists and how important it is for us to have a forum for open and honest communication, then talk to us about sponsorship opportunities, we have something for every level.

Regardless, need help? We’re only an e-mail away at secretary AT rtcevents DoT com

See you at DTS & BILT NA

Questioning the Current Reality – Making it Better

The Design Technology Summit has posed questions like “Is BIM Better” and “Where does this BIM path lead [the industry]” and do we have a “BIM Hangover?” We have discussed topics such as design technology Management, Collaboration, Innovation, Training, Content & it’s management, Challenges, Standards, Productivity, Virtual Reality, Project Management, BIM Project Budgeting, and many more. Some attendees argue that although the in-session discussions are quite pertinent to modern day challenges and highly valuable, the conversations in-between sessions and at the social events are also just as valuable if not more-so. No-where else does one see 40 design technology leaders of large firms get together to discuss the industry challenges and solutions. This year we tackle the topic of “innovation” in and outside of the AEC and the Summit agenda is fantastic! If you’ve never attended, I encourage you to request an invitation below.

Design Technology Leaders is an independent & agnostic collective of design technology leaders and directors of over 250 large firms internationally, with over 300 participating members and maintains unique insight into challenges of AEC collaboration. DTS brings together professionals from large firms in the building Architecture and Engineering (AE) design industry who have a responsibility for managing and implementing design technology. DTS is a forum, a venue to discuss ideas – to share, to challenge, and to refine our thinking. The design world is a constantly evolving landscape driven by the adoption of BIM tools, availability of increased computing power, the ubiquity of mobile solutions and “always on” data access. These new paradigms challenge the traditional operations of AE firms and have resulted in a new domain of expertise at the intersection of technology and practice.
Attendance at DTS is by invitation only and limited to 40 registrants. We feel that his number will better foster an atmosphere of active and meaningful discussions between everyone.

  • If you received an invitation, we are hopeful that you are able to join your fellow invitees.
  • If you have questions feel free to contact secretary@rtcevents.com

• If you think you belong at this event, but did not receive an invitation, please email secretary@rtcevents.com to sign-up for future follow-up and communication (Please include your name, e-mail, title, company, company size, address (optional), and a brief response on “why you belong at DTS”?).

Innovation is usually a bumpy road

Recently we printed our first multi-material, 1/8th scale model of our high-rise urban habitat we call “Falcon Tower”. We ran into some issues with material fusion such that the structural analysis model didn’t match with the data we were getting from the printed sensors. The sensors were reporting a striated mix of concrete and steel in the core that was compromising the structure and that would not meet the safety requirements when printed at full-scale. Being such a new technology, it’s understandable that serious issues like this will arise and this is the reason that we went to the expense of printing a scale model. From the perspective of the design-technology leader, I feel the weight of this initial failure bearing down on me. Clearly though, there’s an issue with the translation and scaling of the BIM to the current build of the MMP software because the hardware checked-out fine and the model passed both an automated quality check and a visual quality check done by yours-truly. Still, there’s a lot riding on this for our company as well as a risk of great expense for our client so there can be no question as to the reliability of the delivery process. Luckily, through my participation in the Deign Technology Summit over the years, I’ve forged some great relationships with my peers, most of which are venturing down the same path with multi-material building printing, and I can reach out to them to see if they are experiencing the same issues at scale and discuss solutions that I may have overlooked. Innovation can be a double-edge sword but I believe that without great risk there is seldom great reward.

This is fiction. One day in the near future I may be having this issue and I’m certain that I’ll still be relying on the colleagues I’ve met at DTS to help solve the issues quickly. Join this community of Design Technology Leaders this summer in Toronto to talk about innovation and other topics, and take a step towards a greater future for your company through a knowledge network that’s unmatched in this industry.

Our attendance is capped at 40, so please apply early. If you’d like to attend but did not receive an invitation, please email us at: secretary@rtcevents.com and include your name, e-mail, title, company, approximate number of employees, company website and a brief response on “why you belong at DTS”. I look forward to seeing you there!

Registration Opens Soon!

Have you ever thought “I wish I had someone to talk to who understands what I’m dealing with”?  The Design Technology Summit is a great opportunity to collaborate with a room full of design technology leaders just like you… and registration is right around the corner!

We all have similar struggles, architecture and engineering alike.  It’s nice to get together with others who are experiencing those same struggles or have experienced them in the past and found a solution.  If you’re anything like me, it really helps to know you’re not alone.

If you haven’t attended DTS before, this is a great year to register.  We’ve modified the registration process and now anyone can apply to attend.  See Robert Manna’s blog post DTS New Year, New Faces, New Changes describing this and other exciting new changes.

DTS is full of high-level conversation that makes gears turn and sparks fly.  I can personally say I’ve come away from each summit with multiple ideas on how to improve our company workflows, as well as confirmation on the direction we should be headed.

If you’re a design technology leader in the Architecture and Engineering (AE) industry who has ideas to share and is looking to learn from others, then add your voice to the conversation at DTS 2017 in Toronto this summer!